Nodha Industrial Technology Wuxi Co., Ltd
Nodha Industrial Technology Wuxi Co., Ltd Quality, Your Value, Our Life
Add to Cart
PIPE BEVELING MACHINE
The ID-Mounted beveling operation utilizes an expandable mandrel which is slid into the open end of the pipe. Tighten draw nut extend the expanding blocks and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the pipe from the end, a bevel is finished which conforms to the bevel angle required. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.
| Features |
| Application |
| Specification |
| Selection Guide |
| Model | Clamping Range (ID) | Working Range (OD) | Wall Thickness | ||
| mm | inch | mm | mm | ||
| 80 | 28-76 | 3 | 88.9 | ≤15 | |
| 120 | 40-110 | 4 | 114.3 | ≤15 | |
| 252 | 80-240 | 10 | 273.05 | ≤20 | |
| Order Guide |
Before you place order to us, please let us know the following information:
Choose the right Model
Confirm your electric power supply ( Voltage, frequency and phase)
Confirm the beveling angel required
Confirm the welding joint required (U, V, Double V or Compound preparation)
Advise your pipe material ( Carbon steel, stainless steel or others)
Other special demands about machine
The spare parts needed
If the pipe wall thickness more than 30mm, inform us in advance (Important)
Working On Site
Exhibition
Certification
After-Sale Service
1. Warranty period: 12 months
2. Emergency spare parts required dispatched within 24 hours
