Nodha Industrial Technology Wuxi Co., Ltd
Nodha Industrial Technology Wuxi Co., Ltd Quality, Your Value, Our Life
Add to Cart
PIPE BEVELING MACHINE
The ID-Mounted beveling operation use an expandable mandrel which is insert into the open end of the pipe. Tighten draw nut extend the expanding blocks and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the pipe from the end, a bevel is finished which conforms to the bevel angle required. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.
Application
Features
Standard Supply
Machine, pneumatic drive system, 1 pcs cutting tool bit, 1 pcs 30 degree beveling tool bit, 1 pcs 37.5 degree beveling tool bit, expanding block, wrench, manual, guarantee card, plywood case.
Selection Guide
| Model | Clamping Range (ID) | Working Range (OD) | Wall Thickness | ||
| mm | inch | mm | mm | ||
| 80 | 28-76 | 3 | 88.9 | ≤15 | |
| 120 | 40-110 | 4 | 114.3 | ≤15 | |
| 252 | 80-240 | 10 | 273.05 | ≤20 | |
Tool Bits
Typical Buttwelding Joint
Working On-site
After-Sale Service
1. Warranty period: 12 months
2. Emergency spare parts required dispatched within 24 hours